• January 2022
  • D2401-AA, ideal 24VDC, 1A power supply for driving magnetic fire door release systems and other 24DC applications where no standby batteries are needed.
  • E-box, large multi-purpose steel box for housing any of the 34 Dycon(0.5A to 10A) power supply modules, peripherals & 3rd Party controller products
  • December 2022
  • FIX-MAG-01, a heavy-duty magnetic fixing kit to enable PCB's to be fitted to metal housings without the need for drilling and tapping holes.
  • November 2023
  • A range of cable connectors and power accessories designed to speed up the installation of control units to their power supplies and their batteries. These include connectors to join two batteries together to double the stand-by capacity.
  • June 2024
  • D25D60K2412, a voltage converter for 24VDC PSU outputs that converted then to 12VDC inputs to drive 12VDC devices in the same system without the need for a separate 12VDC PSU and battery.

The latest products & innovations from Dycon Power Solutions

June 2024

Dycon D25D60K2412 is a useful and economical way of adding a 12VDC output from existing Dycon 24VDC power supplies. Particularly, useful where a 24VDC system needs to have a 12VDC device operating nearby which would normally require a second 12VDC PSU and, often, a second 12VDC back-up battery. This converter provided 12VDC 3A, with a short-time peak of 5A, and utilises the 2 x 12VDC back-up batteries provided by the 24VDC PSU. Connection is just 4-wires and the D25D60K2412 requires no programming or configuration

D25D60K2412 converter


Dycon's CAB-range is a new range of low-cost, handy accessories for the connection of power supplies to batteries and to 3rd Party peripherals. One useful connector cable enables you to join two 7Ah batteries together into a single output enabling you to double a power supply's stand-by capacity. Another unit is a power connector lead with a 1A replaceable in-line fuse, offering extra protection to valuable equipment in hostile environments.

Dycon's FIX-MAG-01, a heavy-duty magnetic fixing kit enables PCB's to be fitted to metal housings without the need for drilling and tapping holes.

The D2401-AA is specially designed for powering 24VDC magnetic fire door releases but can be used for anything requiring 24VDC 1A without battery back-up. Capable of powering up to 8 x double fire doors or 16 x single fire doors, based on 50mA each, the D2401-AA also has an Opto-relay output to remotely signal if the mains or the 24 VDC output fails and an easily visible LED indicator to provide a quick visual status indication. The unit is housed in a new, compact, 1.5mm steel box, attractively styled to blend into the decor of hotels, offices, hospitals, and other large buildings, with rounded corners to make cleaning even easier.

D2401-AA, showing the neat, compact design and the easily visible, green, status indicator LED and, an open shot showing the PCB and a number of the cable knock-outs making installation easy

The new Dycon E-box is designed to provide ample space for an installer fit any one of Dycon's 34 x 12VDC or 24VDC power modules, as well as system peripherals such as output splitters, DIN-rails and relays, and these can be supplied ready-fitted. The E-box is pre-drilled to accept a number of 3rd party control modules from leading manufacturers such as Access Security Products, Control Soft, Honeywell, Lenel, Mercury, Paxton, Vanderbilt, ACT, Gallagher, and HID. Even once these are all fitted, the E-box can still have space for 2 x 17Ah batteries.







A typical E-box arrangement showing the layout when fitted with a Dycon D1532-P 3A EN50131 G3  PSU module, 2 Mercury controllers, an 8-way output splitter, a fire relay and a 17Ah battery